Overview: Smart pan brake (full height wing gate) is the result of many years of careful development, development and production of intelligent passageway management equipment, personnel is the main channel for intelligent management of high-tech products. The device will be mechanical, electronic, microprocessor control and a variety of identification technology organically integrated identification system through a variety of optional equipment and the use of reliable safety protection devices, alarm devices, directions, and extended-friendly The LED count display interface, coordination channel to achieve intelligent control and management. Swing gate can be easily compatible smart IC cards, ID cards, barcode cards, fingerprint reader identify the device used for access to provide civilized and orderly passage way to effectively manage personnel access. It can be widely used in railway stations, docks, subways, factories, buildings, intelligent community, hotels, clubs, enterprises and institutions such as the need-to-channel intelligent management of the occasion. Divided into: single movement: for single and multi-channel; dual movement: for multi-channel two, functions and features 2.1 Standard Product Features: 1) with fault detection and alarm functions, user maintenance and use; 2) through the control board's built-in small press plate, programmable device running status; 3) mechanical pinch, anti-bumps function, in the door meet resistance during reset, the motor within the specified time automatically stop working, the default delay is reset again (until reset), and the intensity is very small (≤ 2Kg); 4) Anti-rushing function gate signal is not received, the door automatically locked; 5) door sync adjustable (for Shuangzha case); 6) with automatic reset function, gate, after a specified period of time does not pass, the system will automatically cancel the user's current access permissions; 7) can be adjusted normally open or normally closed to meet the requirements of different venues; 8) can be used with a variety of equipment mounted reader receiving relay switch signal work; 9) can be unidirectional or bidirectional control of personnel access; 10) can be directly through the remote management computer control and management ; 11) delay automatic reset, the standard is turned on automatically reset after 5 seconds; 12) power door automatically opens, power is automatically closed, meet fire safety requirements. 13) Sound (light) alarm function, including illegal intrusion alarm, (reverse into closing); etc.; 14) counting function (optional); 15) pinch function (four pairs of infrared); 16) Expertise The logical judgment, infrared reset function (4 or 6 to infrared, optional); 17) speech output, user-friendly prompts correct password (optional)). 3, the main structure and configuration (single) ◇ ◇ cabinet 2 door panel 2 sets of 2 ◇ ◇ ◇ directional board 4 switch power two motors 2 ◇ ◇ ◇ logic board an IR 8/10 ◇ voice module for 1 set (optional) ◇ counting board 2 (optional) ◇ movement and the transmission part of the two sets of four, the standard technical parameters ◇ Case Material: Domestic Standard (304) stainless steel ◇ Case Size: 1400 L * 300 W * 1000 Height (MM) (standard) ◇ channel width: 550mm ◇ Weight (single movement): 80Kg ◇ entry, exit direction: unidirectional or bidirectional ◇ Working voltage: AC220 ± 10% V/50 ± 10 % HZ ◇ Motor: DC brush motor (24V) ◇ Input interface: dry contact signal or 12V level signal or pulse width ≥ 100ms 12V pulse signal, driving current ≥ 10mA ◇ Communication interface: RS485 standard distance ≤ 1200 米 ◇ LED indicator: 2 reader windows: 2 ◇ access speed: 40 people / minute (normally open) ,25-30 persons / min (NC) ◇ gate opening and closing time: 1-2 seconds after power ◇ The time required to enter the access status: 3 seconds after the failure ◇ Automatic reset time: 10 seconds ◇ Working environment: indoor, outdoor (Yin shed) ◇ Temperature: -10 ℃ - 50 ℃ Relative humidity: ≤ 90%, non-condensing dew